Safety Showers - Use & Testing
To use:
- Pull the handle down to turn on.
- Remove clothing if necessary.
Note: Approximately 30 gallons per minute will flow until handle is pushed up. The showers do not have drains; if an assistant is available, he/she should mop the floor. - Push handle up to stop flow when finished.
- If possible, the shower water should be retained for Environmental Health and Safety.
- Report all accidents to the laboratory supervisor and the department chair.
To test:
- The showers do not have drains; use a bucket and funnel (which can be checked out from ChemStores) to avoid spilling water on the floor and yourself.
- To activate the shower, pull the handle down. Let the water run for several seconds. Push the handle up to turn off the water.
- Report problems to the Chemistry office.
- Write the date and your initials on the tag.